The reloading press is a machine that counts as one of the most important tools to have in the woods. It is also something that most people just don’t tend to think about, but once you use one every so often, you’ll wonder how you ever lived without one.
You can get plenty of reloading presses for less than $200, especially if you shop around. Yet, that’s still a lot of money to drop on something that can take up space, take up your time, get in the way of your shooting, get in the way of your life, and maybe even break. So why take the risk?
The great thing about reloading presses is that there’s not a lot of them to choose from. You can get different sizes, different gauges, different brands, and different configurations. There are different ways to load them up, too. The trick is knowing which presses are the best to use for the task at hand.. Read more about best reloading press 2021 and let us know what you think.
Cuenco, Luke 06.01.21
Ammo and reloading components have been difficult to come by due to the state of the globe, but that hasn’t prevented many hardcore reloaders from rolling their own ammunition to maintain their ammunition supply at a comfortable level. I began reloading a few years ago and can honestly say that, despite the initial fear aspect, it’s one of the greatest hobbies I’ve ever taken up, and I find myself reloading more for the sheer pleasure of it than than any potential savings. Let’s go through the finest reloading presses presently on the market, whether you reload your own ammunition or are thinking about it.
Contents Table of Contents
Editor’s Choice: RCBS Rock Chucker Supreme Reloading Press
The Rock Chucker is known as the Supreme reloading press for a reason. Everything I’ve seen, heard, and experienced with the RCBS Rock Chucker has led me to believe that it is very sturdy, will last a lifetime, and is designed to operate with some of the most accurate reloading dies available. One of my favorite features is the primer seater’s incorporation into the press, which eliminates the need to detach and reconnect it while switching operations.
The Rock Chucker is a single-stage reloading press that’s ideal for people who want to squeeze every last drop of performance out of their specialty rifle calibers. Not only does RCBS provide a wide range of popular and unusual calibers, but aftermarket firms have also created dies for use with RCBS reloading presses, resulting in a virtually limitless number of calibers that may be loaded with the Rock Chucker.
Pros/Will last a lifetime, sturdy build, and a large selection of dies
Cons/ It’s still a single-stage press, which means it won’t be suitable for high-volume loading.
Bottom Line/ A better single stage press for a seasoned reloader who is certain they want to stay in the hobby.
2. Budget Pick: Lee Precision – Breech Lock Challenger Kit
The Lee is a wonderful press that I used in my early reloading days. In reality, this was my very first reloading press, which was given to me as a present by a close buddy – curses on him for getting me hooked on reloading. The Lee Precision Challenger kit is a great place to start if you’re new to reloading. A single stage press has the benefit of allowing you to get acquainted with each phase of the reloading process before complicating things with numerous stages and various actions taking place at the same time.
Almost everything you’ll need to start reloading your own cartridges is included in the Challenger kit. It comes with one caliber conversion kit, and all you have to do now is provide the brass, bullets, powder, and primers. For $199.99, you can get the Lee Precision Breech Lock Challenger Kit.
Pros/Easy to use and compatible with almost any rifle or handgun caliber.
Cons/Due to the nature of single-stage reloading, this press will produce relatively little volume.
Bottom Line/ Excellent for novices or low-volume wildcat cartridge filling.
RCBS Turret Press No. 3
For a somewhat more experienced reloader who has gotten their feet wet, a turret press is a natural next step. The RCBS Turret press isn’t as quick or as costly as a progressive press, but it still produces rounds considerably faster than a single stage press. The RCBS turret press is fantastic since it can be used as a pseudo-progressive press or a single stage press, depending on your needs.
The RCBS turret press can take a spent case from zero to fully loaded in six steps. If you want the least amount of complexity with the greatest flexibility, this is a fantastic choice. For $299.99, you can get the RCBS Turret Press.
Advantages/Improved output rate while retaining consistency without the astronomical cost of a progressive press
Cons/Not as quick as a progressive press, not as inexpensive as a single stage, and die changes are a pain.
Bottom Line/Excellent if you want a lot of versatility and don’t mind spending a little additional time setting up each caliber separately.
4. Hornady Lock-N-Load AP Automatic Press (Hornady Lock-N-Load AP Automatic Press)
The Hornady Lock-N-Load AP Automatic press is a 5-station auto-indexing press that may help you churn out round after round of handgun or rifle ammo. The press is equipped with an integrated priming system, powder measure, bushing system, and case triggered powder dropper, and comes ready to use right out of the box.
While the Hornady press does not have a quick-change die system, individuals with this level of reloading expertise should have no difficulty changing out dies; all you have to do is run a round or two through the press to double-check your measurements to see if they are within your own personal tolerances. For $529.99, you can get a Hornady Lock-N-Load AP Automatic press.
Pros/Excellent for reloading high-volume rifles or pistols
Cons/Die changes are slow and will require considerable fine tweaking to maintain consistency.
Bottom Line/This is the reloading press for you if you want to maintain your stockpile up to date and can afford the components.
The financial aspects of refilling
This is completely depending on your objectives, however reloading your own ammunition may save you money. I’ve discovered that reloading doesn’t save me a lot of money, but that’s mainly because I wind up firing more. The cost per bullet will decrease, but due of the greater availability and lower cost, you will likely fire a lot more.
So, although it’s less expensive than purchasing ammunition, you’ll make up the difference in time spent reloading with your own time. It’s a fantastic method to shoot more and save money if your time is worthless, as mine is.
As long as you know what you’re doing, reloading your own ammunition is completely safe. Overloading a case or reloading a cartridge with the incorrect primer or powders may result in severe injury or death. Because you’re working with extremely combustible materials, it’s usually a good idea to get advice from an experienced reloader and study reloading guides as frequently as possible. It’s also a good idea to have a fire extinguisher on hand.
In reality, you may begin reloading from nearly anywhere. My own experience, however, prompted me to begin with a single-stage reloading press. A single-stage reloading press is a wonderful way to get your feet wet before moving on bigger presses that perform four or five things with each lever stroke. Even once you’ve learned the ropes and how to operate a turret or progressive press, you’ll find that your single stage press comes in useful when dialing in a fresh load for low-volume loading.
Will each kind of ammo need a separate press?
Some presses are only compatible with pistol or rifle ammo, but for the most part, you’ll only need one. You will, however, need separate die sets for each cartridge you load.
Is it cheaper to reload my own ammunition?
Both yes and no. The initial expenses of reloading are greater, and the components aren’t significantly less expensive than purchasing pre-loaded ammunition. When you start bringing in larger and larger numbers, the cost reductions really start to show up.
Luke works full-time as a writer for websites such as TheFirearmBlog.com, OvertDefense.com, AllOutdoor.com, and, of course,.com. Luke is a competitive shooter, a guns enthusiast, a reloader, an outdoorsman, and a general lover of all things related to the great outdoors. Luke is also a private certified pilot who is working on obtaining his commercial pilot’s license in order to pursue a career as a professional pilot. Luke’s other passions include aviation, aerospace, and military technologies, as well as conservation initiatives in the United States. @ballisticaviation on Instagram c/BallisticAviation on YouTube: https://www.youtube.com/c/BallisticAviation overtdefense.com/author/luke-c/ alloutdoor.com/author/lukec/ thefirearmblog.com/blog/author/luke-c/ thefirearmblog.com/blog/author/luke-c/ thefirearmblog.com/blog/author/luke-c/ thefirearmblog.com/blog/author/luke-c/
We are dedicated to locating, studying, and recommending the highest-quality goods. We are paid compensation if you buy anything after clicking on one of our product reviews’ retail links. Find out more about how it works.
If you are not reloading or loading your own ammo, you are missing out on some of the best deals available for these tools. Although they are not the only choice, they are definitely the best. The ETS Reloader is a simple press that offers great value for the money. it offers many of the same features as the top-of-the-line presses at a much lower price. This means that you can save money, but still get the quality you need to reload any kind of cartridge.. Read more about best progressive reloading press for beginners and let us know what you think.
This article broadly covered the following related topics:
- best reloading press for accuracy
- best reloading press for beginners
- best progressive reloading press for beginners
- best reloading press for 308
- best turret reloading press